10 mm x 10 mm x 1 mm N42 neodymium block
+/-0.1mm manufacturers tolerance on any dimension magnetised axiallly through the thickness so that one 10x10mm face is north and the other is south WARNING: Neodymium magnets are unsuitable for children under 8. All neodymium magnets are brittle. Do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. THIS IS NOT A TOY. DO NOT INGEST
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
11.4 mm x 12 mm C5 ceramic ferrite rod / disk
These magnets are all new, directly from the manufacturer, however, they have been cut from a larger block and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets Magnetised axially through the thickness so that one 100x25mm face is north and the other is south +/-0.1mm manufacturers cutting tolerance
Manufacturing tolerances: Diameter +/-0.24mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south
12 mm x 4 mm x 4 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
12 mm x 4 mm x 4 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
12 mm x 4 mm x 4 mm N38 grade block - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
12.5mm wide foam backed flexible self adhesive magnetic strip - by the metre
This product is A form. If you need to match it to another piece of flexible strip, please use the non-foam backed 12.5mm B form Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they do not line up but are offset by the width of the magnetic bands. Matching pair is only available as a special order and, therefore, only in complete 30metre reels. Requires direct contact with an iron/steel surface or length of matching pair Strong TESA 4965 premium adhesive with pink plastic protective backing Foam allows for fitting to an uneven surface
12.5mm wide flexible self adhesive magnetic strip - by the metre
If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands. For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing
12.5mm wide foam backed flexible self adhesive magnetic strip 30 metre reel
This product is A form. If you need to match it to another piece of flexible strip, please use the non-foam backed 12.5mm B form Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they do not line up but are offset by the width of the magnetic bands. Matching pair is only available as a special order and, therefore, only in complete 30metre reels. Requires direct contact with an iron/steel surface or length of matching pair Strong TESA 4965 premium adhesive with pink plastic protective backing Foam allows for fitting to an uneven surface
Manufacturing tolerances: Diameter +/-0.28mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south
15 mm x 6 mm x 3 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
15 mm x 6 mm x 3 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
15 mm x 6 mm x 3 mm N38 grade block - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
Manufacturing tolerances: Diameter +/-0.32mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south
Manufacturing tolerances: Diameter +/-0.36mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south
Manufacturing tolerances: Diameter +/-0.4mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south
20mm wide flexible self adhesive magnetic strip - 30 metre reel
Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing
20mm wide flexible self adhesive magnetic strip - by the metre
Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing
20mm x 2mm neodymium disks with Self Adhesive Foam - 10 pack
These are sealed tubes of 10 magnets Each magnet is set ups as pairs with 5 having the adhesive backed foam on the north face and 5 having the adhesive backed foam on the south face 3M 4920 foam backed adhesive Easy to peel tabbed paper backing Do not attempt to flex; neodymium is brittle and the magnets will snap.
24mm wide flexible self adhesive magnetic strip - by the metre
If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands. For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing
25 mm x 4 mm x 4 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
25 mm x 4 mm x 4 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
25 mm x 4 mm x 4 mm N38 grade block - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
25mm wide flexible self adhesive magnetic strip - by the metre
If you do not need matching pair, please purchase the B form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands. For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing
3 mm x 1 mm N38 grade disk - PACK OF 100
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 3 mm (0.12") Thickness: 1 mm (0.04") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.05g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.38lb / 6.1oz / 172g Calculated Max Vertical Hold-guidance only: 0.08lb / 1.2oz / 34g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
3 mm x 1 mm N38 grade disk - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 3 mm (0.12") Thickness: 1 mm (0.04") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.05g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.38lb / 6.1oz / 172g Calculated Max Vertical Hold-guidance only: 0.08lb / 1.2oz / 34g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
4 mm x 1 mm N38 grade disk - PACK OF 100
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 4 mm (0.16") Thickness: 1 mm (0.04") A mm x ially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.09g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Ma mm x imum Temp: 80°C / 176°F Theoretical Ma mm x imum Pull: 0.51lb / 8.1oz / 229g Calculated Ma mm x Vertical Hold-guidance only: 0.10lb / 1.6oz / 45g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX , if you attempt to flex them they will snap in half.
4 mm x 1 mm N38 grade disk - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 4 mm (0.16") Thickness: 1 mm (0.04") A mm x ially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.09g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Ma mm x imum Temp: 80°C / 176°F Theoretical Ma mm x imum Pull: 0.51lb / 8.1oz / 229g Calculated Ma mm x Vertical Hold-guidance only: 0.10lb / 1.6oz / 45g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX , if you attempt to flex them they will snap in half.
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
7 mm x 3 mm N38 grade disk - PACK OF 100
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
7 mm x 3 mm N38 grade disk - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
7 mm x 3 mm N38 grade disk - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
7 mm x 7 mm x 3 mm N48 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7x7mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 6 mm high temp neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
C8 20mm x 3mm ferrite disk magnet - craft fridge DIY MRO - PACK OF 50
Technical Specifications Diameter: 20 mm (0.78") Thickness: 3 mm (0.11")Manufacturing tolerances: Diameter +/-0.4mm, Thickness +/-0.1mm Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 4.6g Grade: C8 (In a size for size comparison, a C8 grade magnet will have approximately 2-3 times more pull than the same size C1 craft magnet.) Coating: None Maximum Temp: 250°C / 482°F Theoretical Maximum Pull: 0.5lb / 8oz / 229g Calculated Max Vertical Hold-guidance only: 0.1lb / 1.6oz / 45g WARNING: We would not recommend this magnet be used by children under 3, and not by children under 5 without supervision - choking hazard and soft tissue pinching hazard.
N52 5mm dia x 2.5mm small Neodymium disk magnets - craft fridge DIY MRO - PACK OF 25
Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 5 mm (0.19") Thickness: 2.5 mm (0.09") Weight: 0.36g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 1.9lb / 30oz / 830g Calculated Max Vertical Hold-guidance only: 0.38lb / 6oz / 172g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.