1 mm x 1 mm N52, high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
1" x 1" x 1/4" neodymium block
+/-0.005" manufacturers tolerance on any dimension Magnetised through the thickness so that one 1x1" face is north and the other is south
1" x 1/4" x 1/8" neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 1x0.25" (25.4x6.35mm) face is north and the other is south
+/-0.005" manufacturers tolerance on any dimension
1/2" x 1/8" x 1/8" neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness
10 mm x 10 mm N45 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
10 mm x 10 mm x 1 mm N42 neodymium block
+/-0.1mm manufacturers tolerance on any dimension magnetised axiallly through the thickness so that one 10x10mm face is north and the other is south WARNING: Neodymium magnets are unsuitable for children under 8. All neodymium magnets are brittle. Do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. THIS IS NOT A TOY. DO NOT INGEST
10 mm x 10 mm x 2 mm N52 high grade neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south
10 mm x 10 mm x 3 mm N52 high grade neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
10 mm x 4 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
10 mm x 5 mm x 1 mm Self Adhesive neodymium blocks - 40 pack
These are vacuum sealed packs of 40 magnets Each magnet is set ups as pairs with 20 having the adhesive on the north face and 20 having the adhesive on the south face 3M 467 adhesive Easy to peel tabbed paper backing Do not attempt to flex; neodymium is brittle and the magnets will snap.
10 mm x 5 mm x 1.5 mm N52 high grade neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south
10 mm x 5 mm x 2 mm N52 high grade neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south
10 mm x 5 mm x 3 mm N45 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
10 mm x 6 mm x 2 mm N52 neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
10 mm x 8 mm x 2 mm N52 neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
10mm x 1.5mm N52 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
10mm x 10mm x 5mm N42 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
12 mm x 2 mm N52 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
12 mm x 3 mm N52 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
12 mm x 4 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south
12 mm x 4 mm x 4 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
12 mm x 4 mm x 4 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
12 mm x 4 mm x 4 mm N38 grade block - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
13 mm x 0.5 mm N52, high grade, Neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
14 mm x 0.5 mm N52, high grade, Neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
14mm x 9mm x 3mm N52 high grade Neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 14x9mm face is north and the other is south
15 mm x 0.5 mm N52 Neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
15 mm x 2 mm N52 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
Technical Specifications Diameter: 15 mm (0.59") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 4g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 5.4lb / 87oz / 2461g Calculated Max Vertical Hold-guidance only: 1lb / 17.4oz / 492g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Health and safety leaflet included with every purchase
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
15 mm x 5 mm x 1.5 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 15x5mm face is north and the other is south
15 mm x 6 mm x 3 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
15 mm x 6 mm x 3 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
15 mm x 6 mm x 3 mm N38 grade block - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
17 mm x 10 mm x 1 mm N45 neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north (BLACK MARKED) and the other is south
19 mm x 14 mm x 1 mm N52 neodymium ring
+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south
19.5 mm x 15.5 mm x 1.5 mm NB10 bonded neodymium axial mag ring
+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south
2 mm x 1 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
2 mm x 2 mm x 1 mm N52 neodymium block magnet
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 2x2mm face is north and the other is south
20 mm x 10 mm x 5 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
20 mm x 10 mm x 5 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
20 mm x 10 mm x 5 mm N38 grade block - PACK OF 5
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
20 mm x 10 mm x 5 mm neodymim block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x10mm face is north and the other is south
20 mm x 2 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
20 mm x 20 mm x 5 mm N42 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x20mm face is north and the other is south
20 mm x 4 mm x 2 mm N52, high grade, neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x4mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south This is NOT a toy. DO NOT INGEST
20 mm x 6.4 mm x 5 mm countersunk neodymium ring
These are ideal for a range of holding applications Axially Magnetised through the thickness so that face with the countersink on is magnetised north, while the flat face is magnetised south +/-0.1mm manufacturing tolerances on any dimension Countersunk for an M6 screw
20mm x 2mm neodymium disks with Self Adhesive Foam - 10 pack
These are sealed tubes of 10 magnets Each magnet is set ups as pairs with 5 having the adhesive backed foam on the north face and 5 having the adhesive backed foam on the south face 3M 4920 foam backed adhesive Easy to peel tabbed paper backing Do not attempt to flex; neodymium is brittle and the magnets will snap.
21 mm x 8 mm x 2 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
22 mm x 11 mm x 2 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 22x11mm face is north and the other is south
Technical Specifications Diameter: 22 mm (0.86") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 8.4g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 8lb / 127oz / 3609g Calculated Max Vertical Hold-guidance only: 1.6lb / 25.4oz / 721g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
23 mm x 6 mm x 20 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
24 mm x 20 mm N45 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
25 mm x 10 mm x 4 mm N52 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x10mm face is north and the other is south
25 mm x 4 mm x 4 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
25 mm x 4 mm x 4 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
25 mm x 4 mm x 4 mm N38 grade block - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
25 mm x 5 mm x 5 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x5mm face is north and the other is south
25 mm x 5 mm, N52 high grade, neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
25 mm x 7mm N42 neodymium disk
+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south
25 mm x 8 mm x 2 mm N52 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x8mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
2mm x 2mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south Pull and hold are based on a mathematical formula and are for guidance only.
3 mm x 1 mm N38 grade disk - PACK OF 100
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 3 mm (0.12") Thickness: 1 mm (0.04") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.05g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.38lb / 6.1oz / 172g Calculated Max Vertical Hold-guidance only: 0.08lb / 1.2oz / 34g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
3 mm x 1 mm N38 grade disk - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 3 mm (0.12") Thickness: 1 mm (0.04") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.05g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.38lb / 6.1oz / 172g Calculated Max Vertical Hold-guidance only: 0.08lb / 1.2oz / 34g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
3 mm x 1 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
3 mm x 1 mm x 1 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
3 mm x 10 mm N52 neodymium rod
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
3 mm x 2 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
3 mm x 2 mm x 1 mm N52 high grade neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x2mm face is north and the other is south
3 mm x 3 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
3 mm x 3 mm x 1 mm Tin plated neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x3mm face is north and the other is south
3 mm x 3 mm x 1mm N52 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x3mm face is north and the other is south
3 mm x 3 mm x 20 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south Note the pull and hold calculations are from the mathematical formula for this grade. This does not take account of the fact that they can be more easily removed than expected as the length acts as a lever.
3 mm x 3 mm x 8 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south
3 mm x 4 mm N52 high grade neodymium rod
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
3/4" x 1/8" x 1/16" neodymium ring
Technical Specifications Outer Diameter: 3/4" (19.05mm) inner Diameter: 1/8" (3.175mm) Thickness: 1/16" (1.5875mm) Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 3.25g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 3lb / 48oz / 1378g Calculated Max Vertical Hold-guidance only: 0.6lb / 9.6oz / 275g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.
3/8" x 1/2" neodymium rod
+/-0.005" manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
30 mm x 15 mm x 5 mm N38 grade block - PACK OF 1
Technical SpecificationsThese are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension.Length: 30 mm (1.18")Width: 15 mm (0.59")Thickness: 5 mm (0.2")Axially Magnetised through the thickness so that one 20x10 face is North and the other is south.Weight: 16.65gGrade: N38Coating: Ni-Cu-Ni (Nickel-Copper-Nickel)Maximum Temp: 80°C / 176°FApproximate Maximum Pull: 15.14lb / 242.2oz / 6867gCalculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373gWARNINGS:All neodymium magnets are unsuitable for children; do not ingest.All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
30 mm x 15 mm x 5 mm N38 grade block - PACK OF 10
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
30 mm x 15 mm x 5 mm N38 grade block - PACK OF 5
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
30 mm x 3 mm N45 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
30 mm x 3 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
30 mm x 7mm N42 neodymium disk
+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south
35 mm x 25 mm x 10 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 35x25mm face is north and the other is south
4 mm x 0.5 mm N52, high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
4 mm x 1 mm N38 grade disk - PACK OF 100
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 4 mm (0.16") Thickness: 1 mm (0.04") A mm x ially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.09g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Ma mm x imum Temp: 80°C / 176°F Theoretical Ma mm x imum Pull: 0.51lb / 8.1oz / 229g Calculated Ma mm x Vertical Hold-guidance only: 0.10lb / 1.6oz / 45g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX , if you attempt to flex them they will snap in half.
4 mm x 1 mm N38 grade disk - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 4 mm (0.16") Thickness: 1 mm (0.04") A mm x ially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.09g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Ma mm x imum Temp: 80°C / 176°F Theoretical Ma mm x imum Pull: 0.51lb / 8.1oz / 229g Calculated Ma mm x Vertical Hold-guidance only: 0.10lb / 1.6oz / 45g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX , if you attempt to flex them they will snap in half.
4 mm x 1 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
4 mm x 1 mm x 1 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
4 mm x 2 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
4 mm x 25 mm N42 Neodymium Rod
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
4 mm x 3 mm N52 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
4 mm x 4 mm x 1 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 4x4mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
40 mm x 20 mm x 10 mm N42 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 40x20mm face is north and the other is south
40 mm x 20 mm x 5 mm N42 neodymium block
+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one 40x20mm face is north and the other is south
42 mm x 8 mm x 10 mm Neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 42x8mm face is north and the other is south
5 mm x 0.5 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
5 mm x 1 mm N55 (FIFTY FIVE) highest grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south N55 is the highest grade of neodymium magnets available. Be warned! They are strong and they will take you by surprise. N55 is approximately 5-6% stronger than N52 magnets the same size.
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
5 mm x 1 mm x 1 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
Technical Specifications Diameter: 5 mm (0.19") Thickness (Length): 10 mm (0.39") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 1.45g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6lb / 96oz / 2734g Calculated Max Vertical Hold-guidance only: 1.2lb / 19oz / 546g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Do not attempt to flex, they will snap
5 mm x 2 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south This is NOT a toy. DO NOT INGEST
5 mm x 2 mm x 2 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
5 mm x 2.5 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south DO NOT INGEST, THIS IS NOT A TOY
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
5 mm x 5 mm x 2 mm N52 neodymium blocks
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 5x5mm face is north and the other is south
5 mm x 5 mm x 4 mm N38 grade block - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 5 mm (0.20") Width: 5 mm (0.20") Thickness: 4 mm (0.16") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 0.74g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 2.85lb / 45.7oz / 1295g Calculated Max Vertical Hold-guidance only: 0.57lb / 9.1oz / 259g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
5 mm x 5 mm x 4 mm N38 grade block - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 5 mm (0.20") Width: 5 mm (0.20") Thickness: 4 mm (0.16") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 0.74g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 2.85lb / 45.7oz / 1295g Calculated Max Vertical Hold-guidance only: 0.57lb / 9.1oz / 259g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
6 mm x 1 mm x 1 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
6 mm x 2 mm x 2 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
7 mm x 3 mm N38 grade disk - PACK OF 100
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
7 mm x 3 mm N38 grade disk - PACK OF 25
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
7 mm x 3 mm N38 grade disk - PACK OF 50
Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
7 mm x 7 mm x 3 mm N48 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7x7mm face is north and the other is south
7.5 mm x 5.8 mm x 1.7 mm neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7.5x5.8mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 1 mm N52 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 2 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 3 mm diametrically magnetised higher operating temperature neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 3 mm N52 high grade neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south N52 is the highest grade which is widely available although the higher N55 grade is just starting to appear
8 mm x 4 mm N45 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 4.2 mm x 4 mm neodymium ring
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 5 mm N38 neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 6 mm high temp neodymium disk
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
8 mm x 8 mm x 4 mm N45 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x8mm face is north and the other is south
8mm x 3mm x 1mm N52 High Grade neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x3mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
9 mm x 5 mm x 1.5 mm N52 neodymium block
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 9x5mm face is north and the other is south
+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south
N52 4mm dia x 0.5mm small thin Neodymium disk magnets - craft DIY MRO - PACK OF 50
Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 4 mm (0.15") Thickness: 0.5 mm (0.01") Weight: 0.047g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.3b / 6oz / 138g Calculated Max Vertical Hold-guidance only: 0.06lb / 1.2oz / 27g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
N52 5mm dia x 2.5mm small Neodymium disk magnets - craft fridge DIY MRO - PACK OF 25
Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 5 mm (0.19") Thickness: 2.5 mm (0.09") Weight: 0.36g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 1.9lb / 30oz / 830g Calculated Max Vertical Hold-guidance only: 0.38lb / 6oz / 172g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.