Guy's Magnets 8 mm x 3 mm diametrically magnetised higher operating temperature neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 3 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Budget Range 7 mm x 3 mm N38 grade disk - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 7 mm x 3 mm N38 grade disk - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 7 mm x 3 mm N38 grade disk - PACK OF 100

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 30 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south N52 is the highest grade which is widely available although the higher N55 grade is just starting to appear

Guy's Magnets 3 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 30 mm x 3 mm N45 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 14mm x 9mm x 3mm N52 high grade Neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 14x9mm face is north and the other is south

Guy's Magnets 10 mm x 5 mm x 3 mm N45 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south

Guy's Magnets 12 mm x 3 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 1" x 1/4" x 1/8" neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 1x0.25" (25.4x6.35mm) face is north and the other is south

Guy's Magnets 7 mm x 7 mm x 3 mm N48 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7x7mm face is north and the other is south

Guy's Magnets 4 mm x 3 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 3 mm x 20 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south Note the pull and hold calculations are from the mathematical formula for this grade.  This does not take account of the fact that they can be more easily removed than expected as the length acts as a lever.

Guy's Magnets 3 mm x 3 mm x 8 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south

Guy's Magnets 5 mm x 3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 9 mm x 3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 1/2" x 1/8" x 1/8" neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 15 mm x 3 mm neodymium disk

Technical Specifications Diameter: 15 mm (0.59") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 4g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 5.4lb / 87oz / 2461g Calculated Max Vertical Hold-guidance only: 1lb / 17.4oz / 492g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Health and safety leaflet included with every purchase

Guy's Magnets 22 mm x 3 mm neodymium disk

Technical Specifications Diameter: 22 mm (0.86") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 8.4g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 8lb / 127oz / 3609g Calculated Max Vertical Hold-guidance only: 1.6lb / 25.4oz / 721g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.