Guy's Magnets 24mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 18 mm x 3 mm ferrite disk

Manufacturing tolerances: Diameter +/-0.36mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 16 mm x 3 mm ferrite disk

Manufacturing tolerances: Diameter +/-0.32mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 25mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the B form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets C8 20mm x 3mm ferrite disk magnet - craft fridge DIY MRO - PACK OF 50

Technical Specifications Diameter: 20 mm (0.78") Thickness: 3 mm (0.11")Manufacturing tolerances: Diameter +/-0.4mm, Thickness +/-0.1mm Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 4.6g Grade: C8 (In a size for size comparison, a C8 grade magnet will have approximately 2-3 times more pull than the same size C1 craft magnet.) Coating: None Maximum Temp: 250°C / 482°F Theoretical Maximum Pull: 0.5lb / 8oz / 229g Calculated Max Vertical Hold-guidance only: 0.1lb / 1.6oz / 45g WARNING: We would not recommend this magnet be used by children under 3, and not by children under 5 without supervision - choking hazard and soft tissue pinching hazard.

Guy's Magnets 20mm wide flexible self adhesive magnetic strip - 30 metre reel

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 20mm wide flexible self adhesive magnetic strip - by the metre

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 14 mm x 3 mm C8 Ferrite disk

Manufacturing tolerances: Diameter +/-0.28mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 12 mm x 3 mm ferrite disk

Manufacturing tolerances: Diameter +/-0.24mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south