Guy's Magnets 20 mm x 6.4 mm x 5 mm countersunk neodymium ring

These are ideal for a range of holding applications Axially Magnetised through the thickness so that face with the countersink on is magnetised north, while the flat face is magnetised south +/-0.1mm manufacturing tolerances on any dimension Countersunk for an M6 screw

Guy's Magnets Reindeer fridge magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4

Guy's Magnets Small Magnet Clip strong office / fridge / whiteboard magnet

Maximum length 34mm Width 31.7mm but rising to 33mm at the hinge Maximum depth 21.5mm Holds up to 16 sheets of A4 on our office fridge WARNING: may scratch shiny surfaces, if necessary, use a piece of paper between your whiteboard/fridge and the clip and then use the clip to hold other papers.

Guy's Magnets Pawprint Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets Football Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets 50mm X 10.5mm Ferrite pot magnet with 8.5mm hole

Magnet inside steel cup measures 45mm outer diameter x 22mm inner diameter x 8mm thick +/-0.2mm manufacturers tolerance on any dimension Magnetised axially through the thickness The pull of these magnets was tested in a test rig and will be at LEAST the figure shown The vertical hold is 1/5th of the pull and is, therefore, only for guidance

Guy's Magnets 1/4" neodymium cube

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness

Guy's Magnets Name Badge Fastener

DOES NOT INCLUDE NAME BADGE Name Badge not included - this is the fastener ONLY. WARNING: NOT FOR USE BY PEOPLE WITH PACEMAKERS Length: 45.5 mm (0.39") Width: 13 mm (0.51") Thickness: 1.35mm (0.05")including steel plate and foam pad Weight: 10.6 g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temperature: 50°C / 122°F