Guy's Magnets N52 13mm x 0.5mm very thin Neodymium disk magnets - craft scrapbooking DIY MRO - PACK OF 10

Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 13 mm (0.51") Thickness: 0.5 mm (0.01") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.49g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 1.07lb / 17.2oz / 487g Calculated Max Vertical Hold-guidance only: 0.21lb / 3.4oz / 97g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Health and safety leaflet included with every purchase

Guy's Magnets 13 mm x 0.5 mm N52, high grade, Neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 5 mm x 1 mm Self Adhesive neodymium blocks - 40 pack

These are vacuum sealed packs of 40 magnets Each magnet is set ups as pairs with 20 having the adhesive on the north face and 20 having the adhesive on the south face 3M 467 adhesive Easy to peel tabbed paper backing Do not attempt to flex; neodymium is brittle and the magnets will snap.

Guy's Magnets 10 mm x 3.5 mm x 2.4 mm PN10 bonded neodymium block

Length: 10 mm (0.39") Width: 3.5 mm (0.13") Thickness: 2.4 mm (0.09") Axially Magnetised through the thickness so that one 10x3.5mm face is north, the other is south Weight: 0.504g Grade: NB10 (Bonded Neodymium) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.62lb / 9.9oz / 280g Calculated Max Vertical Hold-guidance only: 0.12lb / 1.9oz / 56g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.

Guy's Magnets N55 5mm dia x 1mm thin Neodymium disk magnets - craft fridge DIY MRO - PACK OF 50

Technical Specifications N55 is the highest grade available. In a size for size comparison an N55 grade magnet will have approximately 5-6% more pull than the same sized N52 grade magnet. Diameter: 5 mm (0.19") Thickness: 1 mm (0.03") Weight: 0.145g Grade: N55 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.8lb / 12oz / 361g Calculated Max Vertical Hold-guidance only: 0.16lb / 2.4oz / 72g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 5 mm x 1 mm N55 (FIFTY FIVE) highest grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south N55 is the highest grade of neodymium magnets available. Be warned! They are strong and they will take you by surprise. N55 is approximately 5-6% stronger than N52 magnets the same size.

Guy's Magnets 3 mm x 3 mm x 1mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x3mm face is north and the other is south

Guy's Magnets N35 4mm dia x 1.5mm small Neodymium disk magnets - craft DIY MRO - PACK OF 50

Technical Specifications Diameter: 4 mm (0.15") Thickness: 1.5 mm (0.05") Weight: 0.139g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.7lb / 12oz / 328g Calculated Max Vertical Hold-guidance only: 0.14lb / 2.4oz / 65g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 8mm x 3mm x 1mm N52 High Grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x3mm face is north and the other is south

Guy's Magnets N35 6mm dia x 1mm small Neodymium disk magnets - craft fridge DIY MRO - PACK OF 50

Technical Specifications Diameter: 6 mm (0.23") Thickness: 1 mm (0.03") Weight: 0.209g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.8lb / 12oz / 344g Calculated Max Vertical Hold-guidance only: 0.16lb / 2.4oz / 68g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 2 mm x 4 mm SXG30/20 samarium cobalt rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 2 mm x 4 mm XG28 samarium cobalt rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 1 mm N52, high grade, neodymium disk

Guy's Magnets 4 mm x 1 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 2mm x 2mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south Pull and hold are based on a mathematical formula and are for guidance only.

Guy's Magnets 12 mm x 6 mm ferrite disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 8 mm x 2 mm N52 neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 19 mm x 14 mm x 1 mm N52 neodymium ring

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 2 mm x 2 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 1 mm x 1 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 2 mm x 2 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 17 mm x 10 mm x 1 mm N45 neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north (BLACK MARKED) and the other is south

Guy's Magnets 6 mm x 1 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 3 mm x 8 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south

Guy's Magnets 4 mm x 4 mm x 1.5 mm samarium cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 4x4mm face is north and the other is south

Guy's Magnets 4 mm x 1.5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 1 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 0.75 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south