Guy's Magnets 20 mm x 6.4 mm x 5 mm countersunk neodymium ring

These are ideal for a range of holding applications Axially Magnetised through the thickness so that face with the countersink on is magnetised north, while the flat face is magnetised south +/-0.1mm manufacturing tolerances on any dimension Countersunk for an M6 screw

Guy's Magnets 25 mm x 5 mm, N52 high grade, neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 17.5 mm x 5 mm S2:17 shallow pot

These are specifically designed for press fitting into application and, as such, have no method of anchoring. +/-0.2mm manufacturing tolerances on the steel shell. Diameter of magnet: 14 mm +/-0.2mm Thickness of magnet: 4mm +/-0.5mm THIS IS NOT A TOY, choking hazard. Pull and hold calculations are approximate only are only for guidance.

Guy's Magnets 20 mm x 8 mm x 5 mm PNI8 grade bonded neodymium block

+/- 0.1mm manufacturers tolerance on any dimension Magnetised through the 5mm thickness so that one 20x8mm face is north, the other is south

Guy's Magnets 10 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 5 mm N38 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 30 mm x 5 mm C8 ferrite disk

+/-0.25mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 40 mm x 20 mm x 5 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one 40x20mm face is north and the other is south

Guy's Magnets 20 mm x 20 mm x 5 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x20mm face is north and the other is south

Guy's Magnets 10mm x 10mm x 5mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets 3 mm x 5 mm samarium cobalt rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets Name Badge Fastener

DOES NOT INCLUDE NAME BADGE Name Badge not included - this is the fastener ONLY. WARNING: NOT FOR USE BY PEOPLE WITH PACEMAKERS Length: 45.5 mm (0.39") Width: 13 mm (0.51") Thickness: 1.35mm (0.05")including steel plate and foam pad Weight: 10.6 g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temperature: 50°C / 122°F

Guy's Magnets 25 mm x 5 mm x 5 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x5mm face is north and the other is south

Guy's Magnets 15 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 20 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south This is NOT a toy. DO NOT INGEST