Guy's Magnets 10 mm x 5 mm x 1.5 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south

Guy's Magnets 14 mm x 0.5 mm N52, high grade, Neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 20 mm x 8 mm x 5 mm PNI8 grade bonded neodymium block

+/- 0.1mm manufacturers tolerance on any dimension Magnetised through the 5mm thickness so that one 20x8mm face is north, the other is south

Guy's Magnets 7.5 mm x 5.8 mm x 1.7 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7.5x5.8mm face is north and the other is south

Guy's Magnets Reindeer fridge magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4

Guy's Magnets 30 mm x 5 mm C8 ferrite disk

+/-0.25mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets N52 5mm dia x 2.5mm small Neodymium disk magnets - craft fridge DIY MRO - PACK OF 25

Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 5 mm (0.19") Thickness: 2.5 mm (0.09") Weight: 0.36g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 1.9lb / 30oz / 830g Calculated Max Vertical Hold-guidance only: 0.38lb / 6oz / 172g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.

Guy's Magnets 11.4 mm x 12 mm C5 ceramic ferrite rod / disk

These magnets are all new, directly from the manufacturer, however, they have been cut from a larger block and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets Magnetised axially through the thickness so that one 100x25mm face is north and the other is south +/-0.1mm manufacturers cutting tolerance

Guy's Magnets Pawprint Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets Fish Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets Football Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets Snowflake Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets Car Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets Wooden Owl Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets Wooden Scotty Dog Fridge Magnets - box of 4

MADE IN THE UK Gift boxed Only sold in boxes of 4 Particular colours or combinations of colours cannot be guaranteed

Guy's Magnets 5 mm x 2.5 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south DO NOT INGEST, THIS IS NOT A TOY

Guy's Magnets 3 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 15 mm x 0.5 mm N52 Neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10mm x 1mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 9 mm x 5 mm x 1.5 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 9x5mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 1 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension magnetised axiallly through the thickness so that one 10x10mm face is north and the other is south WARNING: Neodymium magnets are unsuitable for children under 8. All neodymium magnets are brittle. Do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. THIS IS NOT A TOY. DO NOT INGEST

Guy's Magnets 3 mm x 4 mm N52 high grade neodymium rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 6 mm x 2 mm N52 neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 5 mm x 2 mm N52 neodymium blocks

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 5x5mm face is north and the other is south

Guy's Magnets 5 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south This is NOT a toy. DO NOT INGEST

Guy's Magnets 8 mm x 1 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5.9 mm x 3 mm samarium cobalt disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 3 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 15 mm x 5 mm x 1.5 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 15x5mm face is north and the other is south

Guy's Magnets 25.4 mm x 6.85 mm C8 ferrite disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 27 mm x 6.88 mm C8 ferrite disk

+/-0.25mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 5 mm samarium cobalt rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 4.2 mm x 4 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south