Guy's Magnets 10 mm x 8 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 20 mm x 6.4 mm x 5 mm countersunk neodymium ring

These are ideal for a range of holding applications Axially Magnetised through the thickness so that face with the countersink on is magnetised north, while the flat face is magnetised south +/-0.1mm manufacturing tolerances on any dimension Countersunk for an M6 screw

Guy's Magnets 10 mm x 10 mm x 3 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 5

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 10 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets N52 20mm dia x 2mm strong thin Neodymium disk magnets - craft magic DIY MRO - PACK OF 2

Technical Specifications Diameter: 20 mm (0.78") Thickness: 2 mm (0.07") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 5.81g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.7lb / 107oz / 3038g Calculated Max Vertical Hold-guidance only: 1.34lb / 21.4oz / 607g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Health and safety leaflet included with every purchase

Guy's Magnets 4 mm x 25 mm N42 Neodymium Rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 20 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 12 mm x 4 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 4 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10mm x 10mm x 5mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets 25 mm x 8 mm x 2 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x8mm face is north and the other is south

Guy's Magnets 9 mm x 6.3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 6 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 25 mm Ferrite Banner Hook

Ferrite magnet Steel cup with thread Threaded steel hook inserted White powder coated Height of hook to apex 36.76mm

Guy's Magnets 3 mm x 3 mm x 20 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south Note the pull and hold calculations are from the mathematical formula for this grade.  This does not take account of the fact that they can be more easily removed than expected as the length acts as a lever.

Guy's Magnets 5 mm x 10 mm neodymium rod

Technical Specifications Diameter: 5 mm (0.19") Thickness (Length): 10 mm (0.39") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 1.45g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6lb / 96oz / 2734g Calculated Max Vertical Hold-guidance only: 1.2lb / 19oz / 546g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Do not attempt to flex, they will snap

Guy's Magnets 8 mm x 6 mm high temp neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guys Magnets 20 mm x 10 mm x 5 mm neodymim block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x10mm face is north and the other is south

Guy's Magnets 25 mm x 5 mm x 5 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x5mm face is north and the other is south

Guy's Magnets 15 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 22 mm x 3 mm neodymium disk

Technical Specifications Diameter: 22 mm (0.86") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 8.4g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 8lb / 127oz / 3609g Calculated Max Vertical Hold-guidance only: 1.6lb / 25.4oz / 721g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.