Guy's Magnets 120 mm x 20 mm x 15 mm C8 multipolar ceramic ferrite block

+/-0.25mm manufacturing tolerance on any dimension MULTIPOLAR: Each 120x20mm face is magnetised into four alternating poles.  The opposite poles appear on the other face.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 1

Technical SpecificationsThese are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension.Length: 30 mm (1.18")Width: 15 mm (0.59")Thickness: 5 mm (0.2")Axially Magnetised through the thickness so that one 20x10 face is North and the other is south.Weight: 16.65gGrade: N38Coating: Ni-Cu-Ni (Nickel-Copper-Nickel)Maximum Temp: 80°C / 176°FApproximate Maximum Pull: 15.14lb / 242.2oz / 6867gCalculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373gWARNINGS:All neodymium magnets are unsuitable for children; do not ingest.All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 5

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 30 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 30 mm x 3 mm N45 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 25 mm x 10 mm x 4 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x10mm face is north and the other is south

Guy's Magnets 20 mm x 20 mm x 5 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x20mm face is north and the other is south

Guy's Magnets 3/8" x 1/2" neodymium rod

+/-0.005" manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 32 mm Ferrite Banner Hook

Ferrite magnet Steel cup with thread Threaded steel hook inserted White powder coated Height of hook to apex 35.5mm

Guy's Magnets 10 mm x 10 mm N45 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 20 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south This is NOT a toy. DO NOT INGEST