Guy's Magnets 20 mm x 6.4 mm x 5 mm countersunk neodymium ring

These are ideal for a range of holding applications Axially Magnetised through the thickness so that face with the countersink on is magnetised north, while the flat face is magnetised south +/-0.1mm manufacturing tolerances on any dimension Countersunk for an M6 screw

Guy's Magnets 25 mm x 5 mm, N52 high grade, neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 5 mm x 2 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 3 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 2 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets N52 13mm x 0.5mm very thin Neodymium disk magnets - craft scrapbooking DIY MRO - PACK OF 10

Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 13 mm (0.51") Thickness: 0.5 mm (0.01") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.49g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 1.07lb / 17.2oz / 487g Calculated Max Vertical Hold-guidance only: 0.21lb / 3.4oz / 97g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Health and safety leaflet included with every purchase

Guy's Magnets 13 mm x 0.5 mm N52, high grade, Neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 14 mm x 0.5 mm N52, high grade, Neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 120 mm x 20 mm x 15 mm C8 multipolar ceramic ferrite block

+/-0.25mm manufacturing tolerance on any dimension MULTIPOLAR: Each 120x20mm face is magnetised into four alternating poles.  The opposite poles appear on the other face.

Guy's Magnets 135mm x 28mm Ferrite Pot Magnet with 57mm steel boss & M14 eyelet bolt

Magnet inside steel cup measures 121mm diameter x 22mm thick +/-0.2mm manufacturers tolerance on any dimension The height of the boss is 30mm with an internal M14 thread The M14 steel eyelet, when screwed into place, is 55mm in height giving a total height of the eyelet and boss of 85mm The eyelet has a 29mm hole for attaching rope. Magnetised axially through the thickness The pull of these magnets was tested in a test rig and will be at LEAST the figure shown The vertical hold is 1/5th of the pull and is, therefore, only for guidance  

Guy's Magnets 24mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 24mm wide flexible self adhesive magnetic strip 30 metre reel - B form

Guy's Magnets 24mm wide flexible self adhesive magnetic strip 30 metre reel - A form

If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing"

Guy's Magnets 10 mm x 5 mm x 1 mm Self Adhesive neodymium blocks - 40 pack

These are vacuum sealed packs of 40 magnets Each magnet is set ups as pairs with 20 having the adhesive on the north face and 20 having the adhesive on the south face 3M 467 adhesive Easy to peel tabbed paper backing Do not attempt to flex; neodymium is brittle and the magnets will snap.

Guy's Magnets 3 mm x 3 mm x 1 mm Tin plated neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x3mm face is north and the other is south

Guy's Magnets 10 mm x 3.5 mm x 2.4 mm PN10 bonded neodymium block

Length: 10 mm (0.39") Width: 3.5 mm (0.13") Thickness: 2.4 mm (0.09") Axially Magnetised through the thickness so that one 10x3.5mm face is north, the other is south Weight: 0.504g Grade: NB10 (Bonded Neodymium) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.62lb / 9.9oz / 280g Calculated Max Vertical Hold-guidance only: 0.12lb / 1.9oz / 56g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.

Guy's Magnets 11.4 mm x 8.4 mm x 1.3 mm bonded Samarium Cobalt ring

Technical Specifications Outer Diameter: 11.4mm (0.55") Inner Diameter: 8.4mm (") Thickness: 1.3mm (0.19") Magnetised through the thickness so that one flat face is north and the other is south Weight: 0.5g Grade: SYBG10 Coating: None Maximum Temp: 100°C / 2122°F Theoretical Maximum Pull: 0.09lb / 1.4oz / 40g Calculated Max Vertical Hold-guidance only: 0.018lb / 0.28oz / 8g WARNINGS: All samarium cobalt magnets are unsuitable for children; do not ingest. All samarium cobalt magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin samarium cobalt magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 20mm x 2mm neodymium disks with Self Adhesive Foam - 10 pack

These are sealed tubes of 10 magnets Each magnet is set ups as pairs with 5 having the adhesive backed foam on the north face and 5 having the adhesive backed foam on the south face 3M 4920 foam backed adhesive Easy to peel tabbed paper backing Do not attempt to flex; neodymium is brittle and the magnets will snap.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 1

Technical SpecificationsThese are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension.Length: 30 mm (1.18")Width: 15 mm (0.59")Thickness: 5 mm (0.2")Axially Magnetised through the thickness so that one 20x10 face is North and the other is south.Weight: 16.65gGrade: N38Coating: Ni-Cu-Ni (Nickel-Copper-Nickel)Maximum Temp: 80°C / 176°FApproximate Maximum Pull: 15.14lb / 242.2oz / 6867gCalculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373gWARNINGS:All neodymium magnets are unsuitable for children; do not ingest.All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 5mm polished disk - PACK OF 100

Diameter: Approximately 15mm Thickness: approximately 5mm Weight: 2.95g each Coating: Painted wood top Nickel-Copper-Nickel plated magnet Temp Maximum: Temp 250°C / 482°F Vertical Hold: each magnet held a single sheet of standard A4 copy paper on our office fridge

Guy's Budget Range 4 mm x 1 mm N38 grade disk - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 4 mm (0.16") Thickness: 1 mm (0.04") A mm x ially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.09g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Ma mm x imum Temp: 80°C / 176°F Theoretical Ma mm x imum Pull: 0.51lb / 8.1oz / 229g Calculated Ma mm x Vertical Hold-guidance only: 0.10lb / 1.6oz / 45g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX , if you attempt to flex them they will snap in half.

Guy's Budget Range 4 mm x 1 mm N38 grade disk - PACK OF 100

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 4 mm (0.16") Thickness: 1 mm (0.04") A mm x ially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.09g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Ma mm x imum Temp: 80°C / 176°F Theoretical Ma mm x imum Pull: 0.51lb / 8.1oz / 229g Calculated Ma mm x Vertical Hold-guidance only: 0.10lb / 1.6oz / 45g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX , if you attempt to flex them they will snap in half.

Guy's Budget Range 5 mm x 5 mm x 4 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 5 mm (0.20") Width: 5 mm (0.20") Thickness: 4 mm (0.16") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 0.74g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 2.85lb / 45.7oz / 1295g Calculated Max Vertical Hold-guidance only: 0.57lb / 9.1oz / 259g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 5 mm x 5 mm x 4 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 5 mm (0.20") Width: 5 mm (0.20") Thickness: 4 mm (0.16") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 0.74g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 2.85lb / 45.7oz / 1295g Calculated Max Vertical Hold-guidance only: 0.57lb / 9.1oz / 259g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 5

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 5

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 3 mm x 1 mm N38 grade disk - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 3 mm (0.12") Thickness: 1 mm (0.04") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.05g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.38lb / 6.1oz / 172g Calculated Max Vertical Hold-guidance only: 0.08lb / 1.2oz / 34g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 3 mm x 1 mm N38 grade disk - PACK OF 100

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 3 mm (0.12") Thickness: 1 mm (0.04") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 0.05g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.38lb / 6.1oz / 172g Calculated Max Vertical Hold-guidance only: 0.08lb / 1.2oz / 34g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 7 mm x 3 mm N38 grade disk - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 7 mm x 3 mm N38 grade disk - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 7 mm x 3 mm N38 grade disk - PACK OF 100

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Diameter: 7 mm (0.27") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 2.51g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 2.8lb / 45oz / 1283g Calculated Max Vertical Hold-guidance only: 0.56lb / 9oz / 256g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 12 mm x 4 mm x 4 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 12 mm x 4 mm x 4 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 12 mm x 4 mm x 4 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets N55 5mm dia x 1mm thin Neodymium disk magnets - craft fridge DIY MRO - PACK OF 50

Technical Specifications N55 is the highest grade available. In a size for size comparison an N55 grade magnet will have approximately 5-6% more pull than the same sized N52 grade magnet. Diameter: 5 mm (0.19") Thickness: 1 mm (0.03") Weight: 0.145g Grade: N55 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.8lb / 12oz / 361g Calculated Max Vertical Hold-guidance only: 0.16lb / 2.4oz / 72g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 5 mm x 1 mm N55 (FIFTY FIVE) highest grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south N55 is the highest grade of neodymium magnets available. Be warned! They are strong and they will take you by surprise. N55 is approximately 5-6% stronger than N52 magnets the same size.

Guy's Magnets 30 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south N52 is the highest grade which is widely available although the higher N55 grade is just starting to appear

Guy's Magnets 18 mm x 3 mm ferrite disk

Manufacturing tolerances: Diameter +/-0.36mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 16 mm x 3 mm ferrite disk

Manufacturing tolerances: Diameter +/-0.32mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 2 mm x 1 mm S1:5 Samarium Cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x2mm face is north and the other is south

Guy's Magnets 17.5 mm x 5 mm S2:17 shallow pot

These are specifically designed for press fitting into application and, as such, have no method of anchoring. +/-0.2mm manufacturing tolerances on the steel shell. Diameter of magnet: 14 mm +/-0.2mm Thickness of magnet: 4mm +/-0.5mm THIS IS NOT A TOY, choking hazard. Pull and hold calculations are approximate only are only for guidance.

Guy's Magnets 5 mm x 10mm bonded neodymium rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 20 mm x 8 mm x 5 mm PNI8 grade bonded neodymium block

+/- 0.1mm manufacturers tolerance on any dimension Magnetised through the 5mm thickness so that one 20x8mm face is north, the other is south

Guy's Magnets 7.5 mm x 5.8 mm x 1.7 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7.5x5.8mm face is north and the other is south

Guy's Magnets 2 mm x 2 mm x 1 mm N52 neodymium block magnet

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 2x2mm face is north and the other is south

Guy's Magnets 3 mm x 3 mm x 1mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x3mm face is north and the other is south

Guy's Magnets 42 mm x 8 mm x 10 mm Neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 42x8mm face is north and the other is south

Guy's Magnets 10 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3/4" x 1/8" x 1/16" neodymium ring

Technical Specifications Outer Diameter: 3/4" (19.05mm) inner Diameter: 1/8" (3.175mm) Thickness: 1/16" (1.5875mm) Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 3.25g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 3lb / 48oz / 1378g Calculated Max Vertical Hold-guidance only: 0.6lb / 9.6oz / 275g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.

Guy's Magnets 8 mm x 5 mm N38 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 4 mm samarium cobalt disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 30 mm x 5 mm C8 ferrite disk

+/-0.25mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 8 mm x 3 mm samarium cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x8mm face is north and the other is south

Guy's Magnets N35 4mm dia x 1.5mm small Neodymium disk magnets - craft DIY MRO - PACK OF 50

Technical Specifications Diameter: 4 mm (0.15") Thickness: 1.5 mm (0.05") Weight: 0.139g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.7lb / 12oz / 328g Calculated Max Vertical Hold-guidance only: 0.14lb / 2.4oz / 65g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets N52 5mm dia x 2.5mm small Neodymium disk magnets - craft fridge DIY MRO - PACK OF 25

Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 5 mm (0.19") Thickness: 2.5 mm (0.09") Weight: 0.36g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 1.9lb / 30oz / 830g Calculated Max Vertical Hold-guidance only: 0.38lb / 6oz / 172g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.

Guy's Magnets N52 5mm dia x 0.5mm thin Neodymium disk magnets - craft fridge DIY MRO - PACK OF 50

Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 5 mm (0.19") Thickness: 0.5 mm (0.01") Weight: 0.07g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.42lb / 7oz / 190g Calculated Max Vertical Hold-guidance only: 0.084lb / 1.4oz / 38g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets N52 20mm dia x 2mm strong thin Neodymium disk magnets - craft magic DIY MRO - PACK OF 2

Technical Specifications Diameter: 20 mm (0.78") Thickness: 2 mm (0.07") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 5.81g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.7lb / 107oz / 3038g Calculated Max Vertical Hold-guidance only: 1.34lb / 21.4oz / 607g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Health and safety leaflet included with every purchase

Guy's Magnets Small Magnet Clip strong office / fridge / whiteboard magnet

Maximum length 34mm Width 31.7mm but rising to 33mm at the hinge Maximum depth 21.5mm Holds up to 16 sheets of A4 on our office fridge WARNING: may scratch shiny surfaces, if necessary, use a piece of paper between your whiteboard/fridge and the clip and then use the clip to hold other papers.

Guy's Magnets 1 mm x 1 mm N52, high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8mm x 3mm x 1mm N52 High Grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x3mm face is north and the other is south

Guy's Magnets 11.4 mm x 12 mm C5 ceramic ferrite rod / disk

These magnets are all new, directly from the manufacturer, however, they have been cut from a larger block and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets Magnetised axially through the thickness so that one 100x25mm face is north and the other is south +/-0.1mm manufacturers cutting tolerance

Guy's Magnets 25mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the B form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guys Magnets 12.5mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands. For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guys Magnets 50mm 'C' profile flexible magnetic strip - by the metre

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. Requires direct contact with an iron/steel surface or another length of flexible strip Holds lightweight card and paper in the formed channel To have card lying flat maximum width is 46.75mm Sold by the metre, cut to order

Guys Magnets 66mm x 8mm Retail Boutique Magnets

Options of: 8mm deep M6 thread 11mm m6 stud with nut

Guy's Magnets N35 6mm dia x 1mm small Neodymium disk magnets - craft fridge DIY MRO - PACK OF 50

Technical Specifications Diameter: 6 mm (0.23") Thickness: 1 mm (0.03") Weight: 0.209g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.8lb / 12oz / 344g Calculated Max Vertical Hold-guidance only: 0.16lb / 2.4oz / 68g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets N52 4mm dia x 0.5mm small thin Neodymium disk magnets - craft DIY MRO - PACK OF 50

Technical Specifications N52 is the highest grade which is currently widely and reliably available. In a size for size comparison an N52 grade magnet will have approximately 35% more pull than the same sized N35 grade magnet. Diameter: 4 mm (0.15") Thickness: 0.5 mm (0.01") Weight: 0.047g Grade: N52 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.3b / 6oz / 138g Calculated Max Vertical Hold-guidance only: 0.06lb / 1.2oz / 27g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets C8 20mm x 3mm ferrite disk magnet - craft fridge DIY MRO - PACK OF 50

Technical Specifications Diameter: 20 mm (0.78") Thickness: 3 mm (0.11")Manufacturing tolerances: Diameter +/-0.4mm, Thickness +/-0.1mm Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 4.6g Grade: C8 (In a size for size comparison, a C8 grade magnet will have approximately 2-3 times more pull than the same size C1 craft magnet.) Coating: None Maximum Temp: 250°C / 482°F Theoretical Maximum Pull: 0.5lb / 8oz / 229g Calculated Max Vertical Hold-guidance only: 0.1lb / 1.6oz / 45g WARNING: We would not recommend this magnet be used by children under 3, and not by children under 5 without supervision - choking hazard and soft tissue pinching hazard.

Guy's Magnets 20mm wide flexible self adhesive magnetic strip - 30 metre reel

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 12.5mm wide foam backed flexible self adhesive magnetic strip 30 metre reel

This product is A form. If you need to match it to another piece of flexible strip, please use the non-foam backed 12.5mm B form Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they do not line up but are offset by the width of the magnetic bands.  Matching pair is only available as a special order and, therefore, only in complete 30metre reels. Requires direct contact with an iron/steel surface or length of matching pair Strong TESA 4965 premium adhesive with pink plastic protective backing Foam allows for fitting to an uneven surface

Guy's Magnets 25mm wide flexible self adhesive magnetic strip 30 metre reel - A form

If you do not need matching pair, please purchase the B form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands. For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 4 mm x 25 mm N42 Neodymium Rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 2 mm x 4 mm SXG30/20 samarium cobalt rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 2 mm x 4 mm XG28 samarium cobalt rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 19.5 mm x 15.5 mm x 1.5 mm NB10 bonded neodymium axial mag ring

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 1 mm N52, high grade, neodymium disk

Guy's Magnets 5 mm x 2.5 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south DO NOT INGEST, THIS IS NOT A TOY

Guy's Magnets 5 mm x 0.5 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 0.5 mm N52, high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 1 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 3 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 30 mm x 3 mm N45 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 30 mm x 7mm N42 neodymium disk

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 25 mm x 7mm N42 neodymium disk

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 24 mm x 20 mm N45 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 2mm x 2mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south Pull and hold are based on a mathematical formula and are for guidance only.

Guy's Magnets 20 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 15 mm x 0.5 mm N52 Neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 12 mm x 4 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 12 mm x 6 mm ferrite disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 12 mm x 2 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 4 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10mm x 1mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10mm x 1.5mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 9 mm x 5 mm x 1.5 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 9x5mm face is north and the other is south

Guy's Magnets 8 mm x 8 mm x 4 mm N45 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x8mm face is north and the other is south

Guy's Magnets 40 mm x 20 mm x 10 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 40x20mm face is north and the other is south

Guy's Magnets 40 mm x 20 mm x 5 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one 40x20mm face is north and the other is south

Guy's Magnets 25 mm x 10 mm x 4 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x10mm face is north and the other is south

Guy's Magnets 20 mm x 20 mm x 5 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x20mm face is north and the other is south

Guy's Magnets 20 mm x 4 mm x 2 mm N52, high grade, neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x4mm face is north and the other is south

Guy's Magnets 14mm x 9mm x 3mm N52 high grade Neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 14x9mm face is north and the other is south

Guy's Magnets 10 mm x 5 mm x 3 mm N45 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south

Guy's Magnets 10mm x 10mm x 5mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 1 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension magnetised axiallly through the thickness so that one 10x10mm face is north and the other is south WARNING: Neodymium magnets are unsuitable for children under 8. All neodymium magnets are brittle. Do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. THIS IS NOT A TOY. DO NOT INGEST

Guy's Magnets 20mm wide flexible self adhesive magnetic strip - by the metre

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 15 mm x 2 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 12 mm x 3 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 4 mm N52 high grade neodymium rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guys Magnets 19 mm x 10 mm x 3 mm samarium cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 19x10mm face is north and the other is south

Guy's Magnets 10 mm x 8 mm x 2 mm N52 neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 6 mm x 2 mm N52 neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 2 mm x 1 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x2mm face is north and the other is south

Guy's Magnets 5 mm x 5 mm x 2 mm N52 neodymium blocks

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 5x5mm face is north and the other is south

Guy's Magnets 3 mm x 1 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 1" x 1/4" x 1/8" neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 1x0.25" (25.4x6.35mm) face is north and the other is south

Guy's Magnets 8 mm x 4 mm N45 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south This is NOT a toy. DO NOT INGEST

Guy's Magnets 19 mm x 14 mm x 1 mm N52 neodymium ring

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 1 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 10 mm N52 neodymium rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 2 mm x 2 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 1 mm x 1 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets A4 size Magnetic Paper gloss finish (pack of 5 sheets)

Requires direct contact with steel/iron surface Inkjet printers ONLY Cut with scissors, guillotine or craft knife

Guy's Magnets 5 mm x 2 mm x 2 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 1 mm x 1 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 1 mm x 1 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 1 mm samarium cobalt disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5.9 mm x 3 mm samarium cobalt disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 7 mm x 7 mm x 3 mm N48 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7x7mm face is north and the other is south

Guys Magnets 20 mm x 3 mm C8 ferrite disk

Manufacturing tolerances: Diameter +/-0.4mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 25 mm x 8 mm x 2 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x8mm face is north and the other is south

Guy's Magnets 2 mm x 1 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 2 mm N52 high grade neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 3 mm N52 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guys Magnets 14 Multicoloured Skittle Men Magnets

7 colours: clear, yellow, orange, crimson, green, turquoise-blue, blue-purple Only available as a pack of 14, containing 2 of each colour Each skittle held 11 sheets of A4 paper on our office fridge

Guy's Magnets 50mm X 10.5mm Ferrite pot magnet with 8.5mm hole

Magnet inside steel cup measures 45mm outer diameter x 22mm inner diameter x 8mm thick +/-0.2mm manufacturers tolerance on any dimension Magnetised axially through the thickness The pull of these magnets was tested in a test rig and will be at LEAST the figure shown The vertical hold is 1/5th of the pull and is, therefore, only for guidance

Guy's Magnets 17 mm x 10 mm x 1 mm N45 neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north (BLACK MARKED) and the other is south

Guy's Magnets 9 mm x 6.3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 35 mm x 25 mm x 10 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 35x25mm face is north and the other is south

Guy's Magnets 12.5mm wide foam backed flexible self adhesive magnetic strip - by the metre

This product is A form. If you need to match it to another piece of flexible strip, please use the non-foam backed 12.5mm B form Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they do not line up but are offset by the width of the magnetic bands.  Matching pair is only available as a special order and, therefore, only in complete 30metre reels. Requires direct contact with an iron/steel surface or length of matching pair Strong TESA 4965 premium adhesive with pink plastic protective backing Foam allows for fitting to an uneven surface

Guy's Magnets 15 mm x 5 mm x 1.5 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 15x5mm face is north and the other is south

Guy's Magnets 4 mm x 8 mm neodymium rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 29 mm x 10 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 14 mm x 3 mm C8 Ferrite disk

Manufacturing tolerances: Diameter +/-0.28mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 6 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets Electronic Pole Tester

Sensitivity: +/- 15mT on/off hysteresis Operating Temperature Range: 0C to +50C Storage Temperature -20C to +70C Battery information: 4 x LR44/A76 (1.5V each) included. Video instructions for battery insertion Includes pen top clip for convenience. All batteries are brand new and have been fitted and tested by us, immediately prior to dispatch

Guy's Magnets 4 mm x 4 mm x 1 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 4x4mm face is north and the other is south

Guy's Magnets 5 mm x 0.5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 10 mm neodymium rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 25.4 mm x 6.85 mm C8 ferrite disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets Vehicle Mag Pad 1

Maximum Holding force 9kg Tested to 70mph M6 thread and nylock nut 16mm stud length Foam is just present as a place holder and is not part of the product

Guy's Magnets 27 mm x 6.88 mm C8 ferrite disk

+/-0.25mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3/8" x 1/2" neodymium rod

+/-0.005" manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 6 mm x 1 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 25 mm Ferrite Banner Hook

Ferrite magnet Steel cup with thread Threaded steel hook inserted White powder coated Height of hook to apex 36.76mm

Guy's Magnets 32 mm Ferrite Banner Hook

Ferrite magnet Steel cup with thread Threaded steel hook inserted White powder coated Height of hook to apex 35.5mm

Guy's Magnets 3 mm x 3 mm x 20 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south Note the pull and hold calculations are from the mathematical formula for this grade.  This does not take account of the fact that they can be more easily removed than expected as the length acts as a lever.

Guy's Magnets 3 mm x 3 mm x 8 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm N45 neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 10 mm neodymium rod

Technical Specifications Diameter: 5 mm (0.19") Thickness (Length): 10 mm (0.39") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 1.45g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6lb / 96oz / 2734g Calculated Max Vertical Hold-guidance only: 1.2lb / 19oz / 546g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Do not attempt to flex, they will snap

Guy's Magnets 1/4" neodymium cube

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness

Guy's Magnets 1/2" neodymium cube

+/-0.005" manufacturers tolerance on any dimension

Guy's Magnets 4 mm x 4 mm x 1.5 mm samarium cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 4x4mm face is north and the other is south

Guy's Magnets 3 mm x 5 mm samarium cobalt rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 4 mm x 20 mm alnico rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 19 mm alnico rod

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

10.8 mm x 6.3 mm x 4.4 mm C8 ferrite block

+/-0.2mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10.8mm x 6.3mm face is north and the other is south. North pole is painted red These magnets are all new, directly from the manufacturer, however, they have been cut from larger blocks and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets.  

Office Clip(TM) Unique rocker switch fridge / office magnet

Unique tipping motion Made in Germany Not suitable for glass magnetic boards How to use it video

Guy's Magnets Name Badge Fastener

DOES NOT INCLUDE NAME BADGE Name Badge not included - this is the fastener ONLY. WARNING: NOT FOR USE BY PEOPLE WITH PACEMAKERS Length: 45.5 mm (0.39") Width: 13 mm (0.51") Thickness: 1.35mm (0.05")including steel plate and foam pad Weight: 10.6 g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temperature: 50°C / 122°F

Guy's Magnets 4 mm x 1.5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 1 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 5 mm x 3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 0.75 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 4 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 6 mm high temp neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 9 mm x 3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 21 mm x 8 mm x 2 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 23 mm x 6 mm x 20 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 3 mm x 1 mm x 1 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 8 mm x 4.2 mm x 4 mm neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 1/2" x 1/8" x 1/8" neodymium ring

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guys Magnets 20 mm x 10 mm x 5 mm neodymim block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x10mm face is north and the other is south

Guy's Magnets 22 mm x 11 mm x 2 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 22x11mm face is north and the other is south

Guy's Magnets 25 mm x 5 mm x 5 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x5mm face is north and the other is south

Guy's Magnets 1" x 1" x 1/4" neodymium block

+/-0.005" manufacturers tolerance on any dimension Magnetised through the thickness so that one 1x1" face is north and the other is south

Guy's Magnets 10 mm x 2 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 10 mm x 3 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 12 mm x 3 mm ferrite disk

Manufacturing tolerances: Diameter +/-0.24mm, Thickness +/-0.1mm Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 15 mm x 3 mm neodymium disk

Technical Specifications Diameter: 15 mm (0.59") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 4g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 5.4lb / 87oz / 2461g Calculated Max Vertical Hold-guidance only: 1lb / 17.4oz / 492g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. Health and safety leaflet included with every purchase

Guy's Magnets 15 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south

Guy's Magnets 20 mm x 5 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south This is NOT a toy. DO NOT INGEST

Guy's Magnets 22 mm x 3 mm neodymium disk

Technical Specifications Diameter: 22 mm (0.86") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one flat face is north, the other is south Weight: 8.4g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 8lb / 127oz / 3609g Calculated Max Vertical Hold-guidance only: 1.6lb / 25.4oz / 721g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 3 mm x 1 mm neodymium disk

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one flat face is north and the other is south