Guy's Magnets 10 mm x 5 mm x 1.5 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south

Guy's Magnets 10 mm x 5 mm x 2 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 3 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 2 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets 120 mm x 20 mm x 15 mm C8 multipolar ceramic ferrite block

+/-0.25mm manufacturing tolerance on any dimension MULTIPOLAR: Each 120x20mm face is magnetised into four alternating poles.  The opposite poles appear on the other face.

Guy's Magnets 24mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 24mm wide flexible self adhesive magnetic strip 30 metre reel - B form

Guy's Magnets 24mm wide flexible self adhesive magnetic strip 30 metre reel - A form

If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing"

Guy's Magnets 10 mm x 5 mm x 1 mm Self Adhesive neodymium blocks - 40 pack

These are vacuum sealed packs of 40 magnets Each magnet is set ups as pairs with 20 having the adhesive on the north face and 20 having the adhesive on the south face 3M 467 adhesive Easy to peel tabbed paper backing Do not attempt to flex; neodymium is brittle and the magnets will snap.

Guy's Magnets 3 mm x 3 mm x 1 mm Tin plated neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x3mm face is north and the other is south

Guy's Magnets 25mm wide RED COATED flexible self adhesive magnetic strip 30 metre reel - B form

Technical Specifications Width: 25 mm (1") Thickness: 1.5 mm (1/16") +/- 0.25mm manufacturing tolerance. Grade: Flexible C1 (MGOe 0.85) Coating: TESA 4965 Adhesive with pink plastic backing to protect the adhesive; RED COATING TO MAGNETISED SURFACE Maximum Temperature: 50°C / 122°F Theoretical Maximum Pull: 215g per centimetre of length Calculated Max Vertical Hold-guidance only: 43g per centimetre of length Intended Use: lightweight fridge magnets, nothing else.

Guy's Magnets 10 mm x 3.5 mm x 2.4 mm PN10 bonded neodymium block

Length: 10 mm (0.39") Width: 3.5 mm (0.13") Thickness: 2.4 mm (0.09") Axially Magnetised through the thickness so that one 10x3.5mm face is north, the other is south Weight: 0.504g Grade: NB10 (Bonded Neodymium) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 0.62lb / 9.9oz / 280g Calculated Max Vertical Hold-guidance only: 0.12lb / 1.9oz / 56g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 1

Technical SpecificationsThese are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension.Length: 30 mm (1.18")Width: 15 mm (0.59")Thickness: 5 mm (0.2")Axially Magnetised through the thickness so that one 20x10 face is North and the other is south.Weight: 16.65gGrade: N38Coating: Ni-Cu-Ni (Nickel-Copper-Nickel)Maximum Temp: 80°C / 176°FApproximate Maximum Pull: 15.14lb / 242.2oz / 6867gCalculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373gWARNINGS:All neodymium magnets are unsuitable for children; do not ingest.All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 5 mm x 5 mm x 4 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 5 mm (0.20") Width: 5 mm (0.20") Thickness: 4 mm (0.16") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 0.74g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 2.85lb / 45.7oz / 1295g Calculated Max Vertical Hold-guidance only: 0.57lb / 9.1oz / 259g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 5 mm x 5 mm x 4 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal. Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 5 mm (0.20") Width: 5 mm (0.20") Thickness: 4 mm (0.16") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 0.74g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 2.85lb / 45.7oz / 1295g Calculated Max Vertical Hold-guidance only: 0.57lb / 9.1oz / 259g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 5

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 30 mm x 15 mm x 5 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 30 mm (1.18") Width: 15 mm (0.59") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 16.65g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 15.14lb / 242.2oz / 6867g Calculated Max Vertical Hold-guidance only: 3.03lb / 48.4oz / 1373g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 5

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 20 mm x 10 mm x 5 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 20 mm (0.79") Width: 10 mm (0.39") Thickness: 5 mm (0.2") Axially Magnetised through the thickness so that one 20x10 face is North and the other is south. Weight: 7.4g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Approximate Maximum Pull: 10.09lb / 161.5oz / 4578g Calculated Max Vertical Hold-guidance only: 2.02lb / 32.3oz / 915g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 12 mm x 4 mm x 4 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 12 mm x 4 mm x 4 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 12 mm x 4 mm x 4 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 12 mm (0.47") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 12x4mm face is north, the other is south Weight: 1.42g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.2lb / 67oz / 1910g Calculated Max Vertical Hold-guidance only: 0.84lb / 13.4oz / 382g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 15 mm x 6 mm x 3 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. Length: 15 mm (0.59") Width: 6 mm (0.23") Thickness: 3 mm (0.11") Axially Magnetised through the thickness so that one 15x6mm face is north, the other is south Weight: 1.99g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 4.3lb / 69oz / 1961g Calculated Max Vertical Hold-guidance only: 0.86lb / 13.8oz / 392g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 25

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 50

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Budget Range 25 mm x 4 mm x 4 mm N38 grade block - PACK OF 10

Technical Specifications These are from our BUDGET RANGE of magnets, ideal for the budget conscious when the tolerances are less important than normal.  Instead of our usual +/-0.1mm tolerances, they have +/-5% tolerances on any dimension. These are ideal for some Scalextric and some slot cars. Please note that several different sizes of magnets are used in these cars and you need to ensure you have the correct one. Length: 25 mm (0.98") Width: 4 mm (0.15") Thickness: 4 mm (0.15") Axially Magnetised through the thickness so that one 25x4mm face is north, the other is south Weight: 2.96g Grade: N38 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temp: 80°C / 176°F Theoretical Maximum Pull: 6.1lb / 97oz / 2757g Calculated Max Vertical Hold-guidance only: 1.22lb / 19.4oz / 551g WARNINGS: All neodymium magnets are unsuitable for children; do not ingest. All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.

Guy's Magnets 25mm wide RED COATED flexible self adhesive magnetic strip - by the metre

Technical Specifications Width: 25 mm (1") Thickness: 1.5 mm (1/16") +/- 0.25mm manufacturing tolerance. Grade: Flexible C1 (MGOe 0.85) Coating: TESA 4965 Adhesive with pink plastic backing to protect the adhesive; RED COATING TO MAGNETISED SURFACE Maximum Temperature: 50°C / 122°F Theoretical Maximum Pull: 215g per centimetre of length Calculated Max Vertical Hold-guidance only: 43g per centimetre of length Intended Use: lightweight fridge magnets, nothing else.

Guy's Magnets 3 mm x 2 mm x 1 mm S1:5 Samarium Cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x2mm face is north and the other is south

Guy's Magnets 20 mm x 8 mm x 5 mm PNI8 grade bonded neodymium block

+/- 0.1mm manufacturers tolerance on any dimension Magnetised through the 5mm thickness so that one 20x8mm face is north, the other is south

Guy's Magnets 7.5 mm x 5.8 mm x 1.7 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7.5x5.8mm face is north and the other is south

Guy's Magnets 2 mm x 2 mm x 1 mm N52 neodymium block magnet

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 2x2mm face is north and the other is south

Guy's Magnets 3 mm x 3 mm x 1mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x3mm face is north and the other is south

Guy's Magnets 42 mm x 8 mm x 10 mm Neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 42x8mm face is north and the other is south

Guy's Magnets 8 mm x 8 mm x 3 mm samarium cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x8mm face is north and the other is south

Guy's Magnets Small Magnet Clip strong office / fridge / whiteboard magnet

Maximum length 34mm Width 31.7mm but rising to 33mm at the hinge Maximum depth 21.5mm Holds up to 16 sheets of A4 on our office fridge WARNING: may scratch shiny surfaces, if necessary, use a piece of paper between your whiteboard/fridge and the clip and then use the clip to hold other papers.

Guy's Magnets 8mm x 3mm x 1mm N52 High Grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x3mm face is north and the other is south

Guy's Magnets 25mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the B form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands.  For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guys Magnets 12.5mm wide flexible self adhesive magnetic strip - by the metre

If you do not need matching pair, please purchase the A form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands. For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guys Magnets 50mm 'C' profile flexible magnetic strip - by the metre

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. Requires direct contact with an iron/steel surface or another length of flexible strip Holds lightweight card and paper in the formed channel To have card lying flat maximum width is 46.75mm Sold by the metre, cut to order

Guy's Magnets 20mm wide flexible self adhesive magnetic strip - 30 metre reel

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 25mm wide flexible self adhesive magnetic strip 30 metre reel - A form

If you do not need matching pair, please purchase the B form - it is the most commonly used. Both forms have the same strength The forms are distinguished by lines on the magnetised surface but this does not affect strength Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they will not line up but are offset by the width of the magnetic bands. For perfect alignment, a length of the A form and B form are required. Requires direct contact with an iron/steel surface or length of matching pair (A/B form) Strong TESA 4965 premium adhesive with pink plastic protective backing

Guy's Magnets 9 mm x 5 mm x 1.5 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 9x5mm face is north and the other is south

Guy's Magnets 8 mm x 8 mm x 4 mm N45 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 8x8mm face is north and the other is south

Guy's Magnets 40 mm x 20 mm x 10 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 40x20mm face is north and the other is south

Guy's Magnets 40 mm x 20 mm x 5 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimensionMagnetised through the thickness so that one 40x20mm face is north and the other is south

Guy's Magnets 25 mm x 10 mm x 4 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x10mm face is north and the other is south

Guy's Magnets 20 mm x 20 mm x 5 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x20mm face is north and the other is south

Guy's Magnets 20 mm x 4 mm x 2 mm N52, high grade, neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x4mm face is north and the other is south

Guy's Magnets 14mm x 9mm x 3mm N52 high grade Neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 14x9mm face is north and the other is south

Guy's Magnets 10 mm x 5 mm x 3 mm N45 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x5mm face is north and the other is south

Guy's Magnets 10mm x 10mm x 5mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10x10mm face is north and the other is south

Guy's Magnets 10 mm x 10 mm x 1 mm N42 neodymium block

+/-0.1mm manufacturers tolerance on any dimension magnetised axiallly through the thickness so that one 10x10mm face is north and the other is south WARNING: Neodymium magnets are unsuitable for children under 8. All neodymium magnets are brittle. Do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter. Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half. THIS IS NOT A TOY. DO NOT INGEST

Guy's Magnets 20mm wide flexible self adhesive magnetic strip - by the metre

Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have OPPOSITE polarisation; for perfect alignment rotate one length by 180° and then bring back together. Requires direct contact with an iron/steel surface or another length of flexible strip. Strong TESA 4965 premium adhesive with pink plastic protective backing

Guys Magnets 19 mm x 10 mm x 3 mm samarium cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 19x10mm face is north and the other is south

Guy's Magnets 3 mm x 2 mm x 1 mm N52 high grade neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 3x2mm face is north and the other is south

Guy's Magnets 5 mm x 5 mm x 2 mm N52 neodymium blocks

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 5x5mm face is north and the other is south

Guy's Magnets 1" x 1/4" x 1/8" neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 1x0.25" (25.4x6.35mm) face is north and the other is south

Guy's Magnets A4 size Magnetic Paper gloss finish (pack of 5 sheets)

Requires direct contact with steel/iron surface Inkjet printers ONLY Cut with scissors, guillotine or craft knife

Guy's Magnets 7 mm x 7 mm x 3 mm N48 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 7x7mm face is north and the other is south

Guy's Magnets 25 mm x 8 mm x 2 mm N52 neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x8mm face is north and the other is south

Guy's Magnets 35 mm x 25 mm x 10 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 35x25mm face is north and the other is south

Guy's Magnets 12.5mm wide foam backed flexible self adhesive magnetic strip - by the metre

This product is A form. If you need to match it to another piece of flexible strip, please use the non-foam backed 12.5mm B form Magnetic strip is magnetised across the width and is multipolar so that there are alternating bands of North and South polarisation and each band runs the entire length of the strip. The outside edges have the same polarisation; when brought together, they do not line up but are offset by the width of the magnetic bands.  Matching pair is only available as a special order and, therefore, only in complete 30metre reels. Requires direct contact with an iron/steel surface or length of matching pair Strong TESA 4965 premium adhesive with pink plastic protective backing Foam allows for fitting to an uneven surface

Guy's Magnets 15 mm x 5 mm x 1.5 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 15x5mm face is north and the other is south

Guy's Magnets 4 mm x 4 mm x 1 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 4x4mm face is north and the other is south

Guy's Magnets Vehicle Mag Pad 1

Maximum Holding force 9kg Tested to 70mph M6 thread and nylock nut 16mm stud length Foam is just present as a place holder and is not part of the product

Guy's Magnets 3 mm x 3 mm x 20 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south Note the pull and hold calculations are from the mathematical formula for this grade.  This does not take account of the fact that they can be more easily removed than expected as the length acts as a lever.

Guy's Magnets 3 mm x 3 mm x 8 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the length so that one 3x3mm face is north and the other is south

Guy's Magnets 4 mm x 4 mm x 1.5 mm samarium cobalt block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 4x4mm face is north and the other is south

10.8 mm x 6.3 mm x 4.4 mm C8 ferrite block

+/-0.2mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 10.8mm x 6.3mm face is north and the other is south. North pole is painted red These magnets are all new, directly from the manufacturer, however, they have been cut from larger blocks and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets.  

Office Clip(TM) Unique rocker switch fridge / office magnet

Unique tipping motion Made in Germany Not suitable for glass magnetic boards How to use it video

Guy's Magnets Name Badge Fastener

DOES NOT INCLUDE NAME BADGE Name Badge not included - this is the fastener ONLY. WARNING: NOT FOR USE BY PEOPLE WITH PACEMAKERS Length: 45.5 mm (0.39") Width: 13 mm (0.51") Thickness: 1.35mm (0.05")including steel plate and foam pad Weight: 10.6 g Grade: N35 Coating: Ni-Cu-Ni (Nickel-Copper-Nickel) Maximum Temperature: 50°C / 122°F

Guys Magnets 20 mm x 10 mm x 5 mm neodymim block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 20x10mm face is north and the other is south

Guy's Magnets 22 mm x 11 mm x 2 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 22x11mm face is north and the other is south

Guy's Magnets 25 mm x 5 mm x 5 mm neodymium block

+/-0.1mm manufacturers tolerance on any dimension Magnetised through the thickness so that one 25x5mm face is north and the other is south

Guy's Magnets 1" x 1" x 1/4" neodymium block

+/-0.005" manufacturers tolerance on any dimension Magnetised through the thickness so that one 1x1" face is north and the other is south